User Manual N11
Software nSMART™
Industrial PC
www.noax.comPage 76 of 120 3085-US-2.4
By adding time delays / pauses to key macros, it is possible to wait for the
Industrial PC or software to respond before proceeding with the next key or key
combination.
Pauses can be set via the pull‐down menu item “Time delay”.
8. Press “OK” to add the function key assignment. The key editor closes.
Fig. 58: Adding the key assignment
9. By clicking on “Apply changes”, the function key assignment will be permanently
saved.
Fig. 59: Saving the assignment
To Next Page
Loading...
