MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
231
subscription
Syntax subscription percentage
no subscription
Context config>router>rsvp>interface
Description This command configures the percentage of the link bandwidth that RSVP-TE can use for
reservation and sets a limit for the amount of over-subscription or under-subscription allowed
on the interface.
When the subscription is set to zero, no new sessions are permitted on this interface. If the
percentage is exceeded, the reservation is rejected and a log message is generated.
The no form of this command resets the percentage to the default value.
Default 100
Parameters percentage — specifies the percentage of the interface’s bandwidth that RSVP-TE
allows to be used for reservations
Values 0 to 1000
To Next Page
Loading...
Need help?
General
