MPLS Guide Label Distribution Protocol
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
549
Parameters ip-address — specifies the LDP peer to debug
event
Syntax [no] event
Context debug>router>ldp>interface
debug>router>ldp>peer
Description This command configures debugging for specific LDP events.
bindings
Syntax [no] bindings
Context debug>router>ldp>peer>event
Description This command displays debugging information about addresses and label bindings learned
from LDP peers for LDP bindings.
The no form of the command disables the debugging output.
messages
Syntax [no] messages
Context debug>router>ldp>if>event
debug>router>ldp>peer>event
Description This command displays specific information (for example, message type, source, and
destination) regarding LDP messages sent to and received from LDP peers.
The no form of the command disables debugging output for LDP messages.
packet
Syntax [no] packet
Context debug>router>ldp>interface
debug>router>ldp>peer
Description This command enables debugging for specific LDP packets.
The no form of the command disables the debugging output.
To Next Page
Loading...
Need help?
General
