Label Distribution Protocol
550
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
hello
Syntax hello [detail]
no hello
Context debug>router>ldp>if>packet
debug>router>ldp>peer>packet
Description This command enables debugging for sent and received LDP Hello packets.
The no form of the command disables the debugging output.
Parameters detail — displays detailed information
init
Syntax init [detail]
no init
Context debug>router>ldp>peer>packet
Description This command enables debugging for LDP Init packets. The detail option displays detailed
information on the type length value (TLV) included in mac-flush packets.
The no form of the command disables the debugging output.
Parameters detail — displays detailed information
keepalive
Syntax [no] keepalive
Context debug>router>ldp>peer>packet
Description This command enables debugging for LDP keepalive packets.
The no form of the command disables the debugging output.
label
Syntax label [detail]
no label
Context debug>router>ldp neighbor>packet
Description This command enables debugging for LDP label packets.
To Next Page
Loading...
Need help?
General
