Connector P/N 277909
Installation
3-35
Part 1120277_01
E 2012 Nordson Corporation
SeeFigure3-9.
2. Connect each pair of input wires to the appropriate terminals (8 through
14) on connector P/N 277909. If input number four is used, terminal 7 on
connector P/N 277908 (available in the installation kit) must also be used.
Table 3-8 lists the terminal numbers that correspond to each input.
NOTE: Connector P/N 277909 is physically keyed to prevent it from
being used in place of connector P/N 277908, which has terminals
numbered 1 through 7.
3. Plug the connector (P/N 277909) into the bottom receptacle of terminal
XT7, which is located on the expansion board. If input number four is
used, plug connector P/N 277908 into the top receptacle on terminal
XT7.
XT7
Figure 3-9 Wiring inputs
To Next Page
Loading...
