131
To view that dive's Log during the Transition Period
-
Press and release the A button (< 2 seconds) to access the
Preview screen (Fig. 120).
Press the S button to view the Log 1 screen (Nitrogen
data).
Press the S button again to view the Log 2 screen (Oxygen
data), if a Nitrox dive.
Press the S button again to return to the NORM SURF
screen.
The screen will revert to NORM SURF after 2 minutes if no
button is pressed.
Log Data will not be stored in the ATOM's memory until the 10
minute Transition Period on the surface is completed.
Once 10 minutes have elapsed, the Surface Interval time display
colon will stop flashing indicating that the Dive and Transition
Period are completed, and a subsequent descent will be consid-
ered a new dive. Operation will revert to the MAIN TIME
Display.
AFTER THE TRANSITION PERIOD
Once the Transition Period has ended, NORM MAIN SURF (Fig.
121) can be accessed from MAIN TIME by pressing the M
button 2 seconds. You will then have full access to other NORM
DC modes (e.g., Plan, Fly, Sat, Log, Hist, Set, etc.).
Fig. 120 - LOG PREVIEW
(during Transition Period)
Fig. 121 - NORM MAIN SURF
(after Transition Period)
To Next Page
Loading...
Need help?
General
