Oceanic ATOM 2.0 - Set a Group (Norm;Gaug Alarms)

54
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and revert to the SET F
screen.
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds) will step through the other SET F
screens.
 Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
SET A GROUP (NORM/GAUG ALARMS)
Set A Sequence:
SET A > Audible > Depth > EDT > TLBG > DTR > Turn Pressure >
End Pressure > PO2
HINT: The SET A Group can also be set/changed
using the PC Settings Upload program.
> SET A Settings remain at the values set until changed.
> Depressing the A and S buttons simultaneously for 4
seconds while NORM or GAUG SURF MAIN is displayed
will access SET A identified by the graphic SETA (Fig. 47).
> Pressing and releasing the A button momentarily (< 2
seconds) while SET A is displayed will advance to SET
AUDIBLE ALARM with the Set Point flashing.
Fig. 47 - SET A