37
During a No Decompression Safety Stop, the set
Stop Depth
(Fig. 30a) is displayed and during a Decompression condition,
the required
Ceiling Stop Depth
is displayed.
Time and Date Displays
Time of Day and NORM/GAUG Mode displays
are
shown in hour:minute format (i.e., 1:16 represents 1 hour and
16 minutes, not 116 minutes!).
FREE Dive Mode displays
are shown in minute:second format. The colon that separates
hours and minutes (minutes and seconds) blinks once per second
when the display is indicating real time (e.g., Surface Interval,
Elapsed Dive Time), and is solid (non-blinking) when times are
calculated projections (e.g., Time to Fly, Plan).
The
Primary Time
display, at the bottom of the screen, has the
largest digits of the display (Fig. 30b). Another
time
display
(Fig. 30c) is located in the middle row. Both displays are
identified by the symbol TIME.
When the ATOM is operating in Dive Computer mode,
Date
is
displayed only to identify dives when they are accessed in the
LOG Mode (Fig. 31). When Units of Measure are set for
Imperial, Month appears to the left of Day (Fig. 31a) separated
by a decimal point (month.day). When set for Metric units, the
Month appears to the right of Day (day.month).
Fig. 31 - LOG PREVIEW
a
a
Fig. 30 - NO DECO SAFETY
STOP
c
b
To Next Page
Loading...
Need help?
General
