56
SET DEPTH ALARM
information includes (Fig. 49):
> Graphic DPTH
> Symbols MAX and FT (or M)
> Set Point graphic value, flashing.
Pressing and releasing the S button momentarily (< 2
seconds) will step through the Set Points from 30 to 330 FT
(10 to 100 M) in 10 FT (1 M) increments at a rate of 1 Set
Point per press of the button.
Depressing and holding the S button will scroll through the
Set Points at a rate of 4 Set Points per second until it is
released.
Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
EDT (Elapsed Dive T ime) ALARM screen with the Set Point
flashing.
Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET A screens.
Pressing the A and S buttons simultaneously for 2 seconds
will save the setting and revert back to the SET A screen.
Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
FREE Mode has separate Depth Alarms.
Fig. 49 - SET DEPTH
To Next Page
Loading...
