40
DIVE COMPUTER (DC) OPERATING MODES
As described on page 12, the ATOM features 3 selectable DC Operating Modes -
NORM - for Normal Air or Nitrox dives
GAUG - for dives with no Nitrogen/Oxygen calculations (Once a dive is made in
GAUG Mode, the ATOM is locked into that Operating Dive Mode for 24 hours after
the dive.
FREE - for dives with no SCUBA
SURFACE MODE
Pressing and holding the M button for 2 seconds while the Local Default Watch TIME
screen is displayed (Main Time or Alternate Time, whichever was selected as the Default)
accesses the selected SURFACE MODE screen (NORM, GAUG, or FREE).
If no dive has been taken within the past 24 hours, the NORM SURF MAIN screen will
appear as the default display indicated by the graphic NORM (solid) (Fig. 33).
The GAUG and FREE SURF MAIN screens can be accessed
by subsequent 2 second presses of the M button. Their graphics
will flash indicating that they can be selected as the Operating
Dive Mode.
To select a Mode for diving, press/release the M button while
that graphic is flashing. When the graphic becomes solid, that
Mode is selected for the type of dives to be conducted.
The Operating Mode selected (NORM, GAUG, or FREE) will
remain on display for 2 hours until a dive is made or another
Operating Mode is selected.
Fig. 33 - NORM SURF MAIN
( no dive made)
To Next Page
Loading...
Need help?
General
