32
If no button is pressed during a period of 2 minutes, the unit
will revert to the Local Default Watch Time screen.
SET DAILY ALARM
, information provided includes (Fig. 24):
> Alarm icon
> Graphics ALRM and SEt.
> Alarm Time previously set (hr:min) with the HOUR Set Point
flashing.
Depressing and holding the S button while the
HOUR
Set
Point is flashing will scroll through the Set Points in 1 hour
increments at a rate of 4 per second from 12: Am to 11:
Pm (or 0: to 23: if 24 hour format). The graphic Am or Pm
will be displayed when setting Time in 12 Hour Format.
Pressing and releasing the A button momentarily (< 2
seconds) will save the HOUR Set Point and/or advance to
SET MINUTE with the Set Point flashing.
Depressing and holding the S button while the
MINUTE
Set
Point is flashing will scroll through the Set Points in 1 minute
increments at a rate of 4 per second from :00 to :59.
Pressing and releasing the A button momentarily (< 2
seconds) will save the MINUTE Set Point and/or advance
to the DAILY ALARM screen indicated by the graphic ON
(or OFF) flashing.
Depressing and holding the M button for 2 seconds will
revert to the Local Default Watch Time screen.
Fig. 24 - SET DAILY ALARM
To Next Page
Loading...
Need help?
General
