125
BUDDY PRESSURE CHECK (NORM only)
During NORM Dives, the ATOM can be used to check (display)
Tank Pressure of 1 or 2 buddies whose TMT Link Codes (Serial
Numbers) have been entered as TMT 2 and TMT 3 in the
ATOM's SET U menu.
NOTE: Using the ATOM for a Buddy Pressure
Check cannot be performed when TMT 2-3 USE is
set for SELF (Gas Switching).
Access to Buddy Pressure Check screens during dives can only
be accomplished during the time that a NORM DIVE MAIN
screen is being displayed and cannot be performed during the
time that an Alarm is sounding.
TO BUDDY PRESSURE CHECK DURING DIVES
Bring the ATOM within range, 3 feet (1 meter), of the
Buddy's Transmitter.
Press and hold the M button for 2 seconds while viewing a
NORM DIVE MAIN screen to access the TMT 2-3 USE
screen displaying the Set Point bud (Fig. 112). If SELF is
displayed, indicating that the ATOM is set for FO2 GAS
Switching, a Buddy Pressure Check cannot be performed.
Fig. 112 - TMT 2-3 USE
(set for BUD)
To Next Page
Loading...
Need help?
General
