25
Depressing and holding the S button while the
DAY
Set
Point is flashing will scroll through the Set Points in one day
(01) increments at a rate of 4 per second from 1 to 31.
P ressing and releasing the A button momentarily (< 2
seconds) will save the Set Point and/or advance to the
MAIN TIME screen.
NOTE: DAY of the WEEK is set automatically
based upon the Date that has been set.
ALTERNATE TIME
Pressing and releasing the M button momentarily 1 time (<
2 seconds) while the MAIN TIME screen is displayed will
access the ALTERNATE TIME screen.
Information provided includes (Fig. 16):
> T issue Loading Bar Graph, if any after NORM/FREE dives.
> Alarm icon (solid) - if the Daily Alarm is set On.
> Lazy 8 symbol (Fig. 16a) identifies Time as Alternate Time.
> Day of the Week graphic MON (or TUE, WED, THU, FRI,
SAT, SUN), or WET (if the unit is wet).
> Battery icon, if an ATOM Low Battery Condition exists.
> Month and Day (Day and Month if set for Metric).
> Time of Day (hr:min :sec) with graphic Am (or Pm).
Fig. 16 - ALTERNATE TIME
a
Main Time/Date can also
be set using the PC Settings
Upload program included
on the ATOM's OceanLog
software CD.
Prior to shipment from the
factory, any error of the
ATOM's Main Time is
determined and corrected.
To Next Page
Loading...
Need help?
General
