47
NORM AND GAUG SURFACE SET MODES
NORM/GAUG Set Mode Sequence:
SURF MAIN > SET F > SET A > SET U > ATOM Serial Number.
Access and step through of the sequence is gained by repeated
simultaneous 2 second presses of the A and S buttons.
Alarms (Set A) and Utilities (Set U) Set Points can also be set/
changed using the PC Settings Upload program. FO2 (Set F)
entries must be made using only the push buttons.
SET F GROUP (FO2)
Set F Sequence:
SET F > FO2 GAS 1 > FO2 GAS 2 > FO2 GAS 3 > FO2 50%
Default.
> Depressing the A and S buttons simultaneously for 2
seconds while the NORM or GAUG SURF MAIN screen is
displayed will access SET F identified by the graphic SETF
(Fig. 41).
> Pressing and releasing the A button momentarily (< 2
seconds) while SET F is displayed will advance to SET FO2
(GAS 1) with the Set Point flashing.
Fig. 41 - SET F
The ATOM reverts to
the last Settings
entered/saved when
24 hours elapse
without a dive or
after a dive.
To Next Page
Loading...
