69
HINT: To change the Duration while operating in
FREE Mode, first access the NORM SURF Mode.
SET SAMPLING RATE
information includes (Fig. 62):
> Graphic SAMP
> Symbol TIME.
> Set Point, flashing.
Pressing and releasing the S button momentarily (< 2
seconds) will step through the Set Points of 2, 15, 30, 60
(:XX seconds).
Depressing and holding the S button will scroll through the
Set Points at a rate of 4 Set Points per second until it is
released.
Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
TMT 1 screen with the Set Point flashing.
Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET U screens.
Depressing the A and S buttons simultaneously for 2
seconds shall save the setting and revert back to the SET U
screen.
Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
Fig. 62 - SET SAMPLING
RATE
SAMPLING RATE is
the frequency (time
interval) at which
data is sampled and
stored in memory for
subsequent down-
load to the PC
OceanLog program.
FREE Mode has a
fixed 1 second
Sampling Rate.
To Next Page
Loading...
Need help?
General
