50
SET FO2 GAS 1,
information includes:
> Graphic GAS1
> PO2 Alarm Set Point with graphic PO2
> Symbol FO2 and FO2 Set Point value, flashing
> Tank 1 icon representing GAS 1
> Symbol NITROX (if set for a numerical value).
> Max Depth allowed for the PO2 Alarm Set (if 21 to 50%)
Depressing and holding the S button while the Set Point is
flashing will scroll the Set Points from AIR (Fig. 42) to 21
through 50% in 1% increments, at a rate of 8 per second.
Hint: The scroll will stop when the button is released, or
momentarily at 32% (even if the button is held depressed).
Pressing and holding the S button will resume the scroll from
32 (Fig. 43) through 50%, then stop at AIR (or 21%).
Pressing and releasing the S button will advance FO2 in
increments of 1% per press of the button.
Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to SET FO2
GAS 2 with the Set Point flashing.
Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds) will step through the other SET F
screens.
Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET F
screen.
Fig. 42 - SET FO2 GAS1
(AIR setting)
Fig. 43 - SET FO2 GAS1
(32% O2 setting)
To Next Page
Loading...
Need help?
General
