20
LOCAL DEFAULT TIME
Watch Main Time
(Fig. 7) is the current Time at your home
location and is normally selected as the Local Default Time.
The normal Watch screen sequence accessed with momentary
presses (less than 2 seconds each) of the M button is -
Main T ime > Alternate T ime > Countdown T imer >
Chronograph > Daily Alarm
Watch Alternate Time
(Fig. 8), which is set by Hour Differen-
tial, is the current Time displaying Am (or Pm) at a remote travel
location. Upon arrival at the location, Alternate Time can be
interchanged with Main Time to make it the Local Default Time
while visiting the travel location.
The M button will then access the screens in this sequence -
Alternate T ime > Main Time > Countdown Timer >
Chronograph > Daily Alarm
While viewing Alternate Time, depressing and holding the S
button for 2 seconds will replace Main Time with Alternate Time
that will then become the Local Default Time until changed.
Fig. 7 - MAIN TIME
Fig. 8 - ALTERNATE TIME
TIME for the Remote
Location will display Am
(or Pm). Local Default
TIME will not.