67
Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
SET CONSERVATIVE FACTOR
information includes (Fig. 60):
> Graphic CONS
> Set Point ON (or OFF), flashing.
> Symbols TIME and NDC.
Pressing and releasing the S button (< 2 seconds) will
toggle between ON and OFF.
Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
BACKLIGHT DURATION screen with the Set Point flashing.
Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET U screens.
Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET U
screen.
Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
Fig. 60 - SET CONSERVA-
TIVE FACTOR
Use the Conserva-
tive Factor option to
help reduce your
exposure to Decom-
pression Sickness.
To Next Page
Loading...
Need help?
General
