EasyManuals Logo

Oceanic ATOM 2.0 User Manual

Oceanic ATOM 2.0
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
16
During the following NORM Dive situations, the 10 second continuous tone will be fol-
lowed by a 5 second steady beep that will not turn off when acknowledged -
Ascending above a required Decompression Ceiling Stop Depth for more than 5
minutes (referred to as a Delayed Violation).
Decompression requires a Ceiling Stop Depth of 70 FT/21 M or deeper.
Being on the Surface for 5 minutes after a Conditional Violation (Permanent
Violation).
BACKLIGHT
To activate the Backlight - press the L button.
The Backlight will activate and illuminate the display for button depression time* plus
the user set Duration time of 0, 5, or 10 seconds, for a maximum of 20 seconds.
(*The Backlight will turn Off if the button is held depressed for more than 10
seconds.)
Press the button again to activate as desired.
NOTE: Extensive use of the Backlight reduces estimated Battery life.
Also, the Backlight does not operate during a Low ATOM Battery
Condition or when the ATOM is connected to a PC.
POWER SUPPLY
The ATOM (Watch) utilizes one 3 volt CR2430 Lithium Battery. When used as a Dive
Computer, the ATOM's battery should operate normally for 1 year or 300 dive hours if 2
dives are conducted during each dive period. The ATOM checks its battery voltage every
2 minutes during surface operation.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oceanic ATOM 2.0 and is the answer not in the manual?

Oceanic ATOM 2.0 Specifications

General IconGeneral
BrandOceanic
ModelATOM 2.0
CategoryDiving Instrument
LanguageEnglish

Related product manuals