EasyManua.ls Logo

Oceanic ATOM 2.0 - Set Free Alarms (Edt, Fda)

Oceanic ATOM 2.0
178 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
143
FREE DIVE EDT (ELAPSED DIVE TIME) ALARM
The FREE EDT Alarm is factory set for 30 seconds. When set ON, the Alarm will sound 3
short beeps and the message TIME will be displayed momentarily every 30 seconds while
the ATOM is operating underwater in FREE DIVE Mode.
Depressing the A and S buttons simultaneously for 2 seconds while the FREE SURF
MAIN screen is displayed, will access SET FREE EDT ALARM with the Set Point
flashing.
NOTE: The FREE EDT Alarm can only be Set
(turned OFF or ON) while on the Surface and can
not be changed during a Dive.
SET FREE EDT ALARM DISPLAY,
information includes (Fig. 131) -
> Graphic EDT.
> Set Point OFF or ON, flashing.
Pressing and releasing the S button momentarily (< 2
seconds) will toggle the Set Point between OFF and ON.
Pressing the A button momentarily (< 2 sec) will accept the
setting and access the SET FREE DEPTH ALARM 1 screen.
Depressing the M button for 2 seconds, or if no button is
pressed during a period of 2 minutes, will revert the
Display to the FREE SURF MAIN screen.
Fig. 131 - SET FREE EDT
ALARM
The Set Point for the
NORM/GAUG EDT
Alarm does not
affect the FREE EDT
Alarm.

Table of Contents

Related product manuals