65
SET UNITS
information includes (Fig. 58):
> Graphic UNIT
> Set Point symbols/graphics PSI, F, and FT (or BAR, C, and
M), flashing.
Pressing and releasing the S button will toggle between
Imperial (F, FT, PSI) and Metric (C, M, BAR).
Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
SAFETY STOP screen with the T ime Set Point flashing.
Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET U screens.
Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET U
screen.
Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
HINT: To change this setting while operating in
FREE Mode, first access the NORM SURF Mode.
Fig. 58 - SET UNITS
UNITS set will apply
to NORM, GAUG,
and FREE Modes.
To Next Page
Loading...
