57
SET EDT (ELAPSED DIVE TIME) ALARM
Information includes (Fig. 50):
> Graphic EDT
> Symbols DIVE and TIME.
> Set Point value (hr:min), flashing.
Pressing and releasing the S button momentarily (< 2
seconds) will increase the Set Point from 0:10 to 3:00
(hours:minutes) in 5 minute (:05) increments.
Depressing and holding the S button will scroll through the
Set Points at a rate of 4 Set Points per second until it is
released.
Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
TLBG (T issue Loading Bar Graph) ALARM screen with the
Set Point flashing.
Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds) will step through the other SET A
screens.
Depressing the A and S buttons simultaneously for 2 seconds
will save the setting and revert back to the SET A screen.
Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
FREE Mode has a separate EDT Alarm.
Fig. 50 - SET EDT
To Next Page
Loading...
