EasyManuals Logo

Oceanic ATOM 2.0 User Manual

Oceanic ATOM 2.0
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #150 background imageLoading...
Page #150 background image
151
When Nitrogen Loading increases to the Caution level indicated
by 4 segments displayed as the TLBG and the UP Arrow appear-
ing solid, 3 short beeps will sound 3 times, the red LED will
flash, and the message UP > HIGH > NI will appear on the
display (Fig. 141).
After the beeps, the message will continue to scroll until the TLBG
recedes to 3 segments at which time the message will change to
FREE and the UP Arrow will be removed.
ENTRY INTO DECO DURING A FREE DIVE
In the event that Nitrogen Loading increases to the Warning
level indicated by all 5 segments of the TLBG and UP Arrow
flashing, 3 short beeps will sound 3 times, the red LED will flash,
and the message UP > VIOL will appear on the display (Fig.
142).
After the beeps, the message UP > VIOL will continue to be
displayed scrolling until you surface, then the graphic VIOL will
alternately be On/Off for 10 minutes after the dive.
Upon surfacing, the UP Arrow will be removed, however, the Full
TLBG will continue to flash for 24 hours and dive computer
operation will revert to Permanent Violation Gauge Mode until a
full 24 hours elapse with no diving. Access to Watch Mode will
be allowed, but access toNORM or GAUG will be blocked.
Fig. 141 - FREE DIVE MAIN
(During TLBG ALARM)
Fig. 142 - FREE DIVE MAIN
(During DECO)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oceanic ATOM 2.0 and is the answer not in the manual?

Oceanic ATOM 2.0 Specifications

General IconGeneral
BrandOceanic
ModelATOM 2.0
CategoryDiving Instrument
LanguageEnglish

Related product manuals