Oceanic ATOM 2.0 - Set Main Time

23
 Pressing and releasing the S button momentarily (< 2
seconds) will toggle the flashing setting between 12 and
24.
 Pressing the A button momentarily (< 2 seconds) will save
the Hour Format Set Point and access the SET TIME screen
with the HOUR Set Point flashing (Fig. 11).
 HINT - Pressing the A button repeatedly (< 2 seconds each
time) will step through the T ime/Date Settings, bypassing
those that don't require setting.
Set Hour and Minute
The graphic Am or Pm displayed when Time in 12 Hour Format.
 Depressing and holding the S button while the HOUR Set
Point is flashing will scroll through the Set Points in 1 Hour
increments at a rate of 4 per second from 12: Am to 11:
Pm (or 0: to 23: if set for 24 Hour Format).
 P ressing and releasing the A button momentarily (< 2
seconds) will save the Hour Set Point and/or advance to
SET MINUTE with the MINUTE Set Point flashing (Fig. 12).
 Depressing and holding the S button while the MINUTE Set
Point is flashing will scroll through the Set Points in 1 minute
increments at a rate of 4 per second from :00 to :59.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the Minute Set Point and/or advance to
the SET DATE screen with the YEAR Set Point flashing.
Fig. 11 - SET HOUR
Fig. 12 - SET MINUTES