86
LOG DATA 1
information includes (Fig. 73):
> Alpha graphic NO-D, DECO, GAUG, or VIOL.
> TLBG with the maximum accumulation segment flashing,
others fixed up to end-of-dive accumulation. All segments
flashing for delayed and full violation.
> Temperature (minimum recorded that dive) and graphic F
(or C if metric).
> Symbol DIVE TIME and Elapsed Dive Time (hours:minutes).
> Symbols TIME and SURFACE.
> Pre dive Surface Interval time (hr:min), 10 - through 23 - for
times greater than 9 hours and 59 minutes, blank for Dive
#1 of a series.
> Maximum Depth and symbol FT (or M).
> Operating Mode symbol NITROX, none if an AIR or GAUG
dive.
Pressing and releasing the S button momentarily (< 2
seconds) button will advance to the LOG DATA 2 screen.
Depressing and holding the M button for 2 seconds or if no
button is pressed during a 2 minute period operation will
revert to the NORM SURF MAIN screen.
Pressing the L button will activate the Backlight.
Fig. 73 - LOG DATA 1
To Next Page
Loading...
Need help?
General
