OEM FX - Page 47

FX / RVE
Safety devices
EN - 15
Fig. 1
Refer to the instructions
• Refertotheinstructionmanualbeforemakingthe
electric connection.
Refer to the attached documentation
• Referencetotheattacheddocumentationismanda-
tory.
The symbol is located on the front of the machine near
the controls, on the back near the power supply cable
socket and on the panel for accessing the electrical parts.
Hand crushing
• Handcrushinghazard.
The symbol is located on the front of the machine
near the control panel and indicates the risk of hand
crushing near the work area.
This symbol is also located on the upper part of the ma-
chineandindicatestheremoteriskthatangercould
be inserted from above while the cover is lowered.
Moving mechanical parts
• Hazardofmovingmechanicalparts.
The marking “moving mechanical parts” is applied on
the electric panel located on the left side of the ma-
chine and indicates that once the panel is removed it
is possible to access hazardous mechanical parts.