Introduction • 13
Available Utilities
You can configure the print server by using one of the following
utilities:
Utility Features System requirements
Quick Setup
(see page 16)
Configure the print server
easily and simply without
installing any software
packages into your system.
You can set the following:
• Enable/disable TCP/IP,
NetWare, EtherTalk,
NetBEUI protocols.
• Set IP address, Subnet
Mask and Gateway for
TCP/IP manually or by
using DHCP.
• Set NetWare Mode and
create Queue/Print
Server/Printer objects.
• Zone name and Port name
for EtherTalk.
Windows*
•XP
• 2000
•NT 4.0
•Me
• 95/98
* with TCP/IP protocol or
IPX/SPX protocol
installed.
To create a NetWare
queue, NetWare Client
32 or IntranetWare Client
should be installed in
your system.
Web Browser
(see page 18)
Configure the print server and
printer by using a Web
browser such as Microsoft
Internet browser or Netscape
Navigator.
Microsoft Internet
Explorer Version 5.5 and
higher or Netscape
Navigator Version 6.2
and higher.
Operating system that
supports the Web
browser.
To Next Page
Loading...
Need help?
General
