Security Features: IPP Encryption • 137
Using AdminManager
1. Launch the AdminManager utility:
– From the Drivers CD supplied with your printer
:
[Next] → select language → [Custom
Install] → [Network Software] → [Installation/
Config] → [Admin Mgr / Quick Setup] → select
language → [OKI Device Standard Setup] → [Execute
from CD-ROM].
– From your desktop (if you installed the utility from the CD)
:
[Start] → [Programs] → [OKI Setup Utility] → [Admin
Manager].
2. Click the printer to configure from the list.
3. Click [Setup] → [OKI Device Setup].
The Password window appears.
4. Enter your password, then click [OK].
5. Click the [Maintenance] tab.
6. Click [Service…].
To Next Page
Loading...
Need help?
General
