Security Features: Web Encryption • 140
2. Type in the printer’s IP Address (refer to the self-diagnostic
printout–see page 12) and press ENTER.
3. Click [Administrator Login], then enter
– your [User name]
(the default is root)
–[Password]
(the default is the last six digits of the MAC [Ethernet]
Address, minus any punctuation).
4. Click the [Security] tab.
5. On the left side, click [Cipher (SSL/TLS)].
The “Encryption of Configuration and Print” window appears.
To Next Page
Loading...
Need help?
General
