Oki C9600hdn Configuration Guide

232
IP Address
Set
Auto
Manual
Sets IP address setup method (TCP/IP).
IP Address xxx.xxx.xxx.
xxx
Sets the IP address (TCP/IP).
Subnet Mask 255.255.255
.0
Sets the Subnet Mask (TCP/IP).
Gateway
Address
xxx.xxx.xxx.
xxx
Sets the Gateway (default router) address
(TCP/IP).
Factory
Defaults?
Execute Specifies whether to initialize the network
menu.
Web Enable
Disable
Enables/Disables the Web/IPP (TCP/IP).
Telnet Enable
Disable
Enables/Disables Telnet (TCP/IP).
FTP Enable
Disable
Enables/Disables FTP (TCP/IP).
SNMP Enable
Disable
Enables/Disables SNMP of FTP (TCP/IP
or NetWare).
Network
Scale
Normal
Small
Normal
: Can work effectively even when
connected to a HUB that has a spanning
tree feature. However, printer start up time
gets longer when computers are
connected to two or three small LANs.
Small
: Computers can cover from two or
three small LANs to a large LAN, but it may
not work effectively when it is connected to
a HUB with a spanning tree feature.
Item Value Description

Oki C9600hdn Specifications

General

Brand	Oki
Model	C9600hdn
Category	Printer
Language	English