Oki C9600hdn

Configuration: Configurable Items • 93
Trap-7
Enable/disable sending a trap when the printer cover is opened.
Trap-8
Enable/disable sending a trap when an error occurs.
AdminManager
[Setup] → [OKI Device Setup] → [SNMP] → [Printer Trap Setup
…] → [TCP #!–5] → [Detail …] → [Trap Enable] → [Cover Open]
Web Browser
[Network] → [SNMP Trap] → [STEP3. Set Printer Trap
Assignments] → [Cover Open]
TELNET
[Setup printer trap] → [Setup TCP#1–5 trap] → [Cover Open trap]
AdminManager
[Setup] → [OKI Device Setup] → [SNMP] → [Printer Trap Setup
…] → [TCP #!–5] → [Detail …] → [Trap Enable] → [Printer Error]
Web Browser
[Network] → [SNMP Trap] → [STEP3. Set Printer Trap
Assignments] → [Printer Error]
TELNET
[Setup printer trap] → [Setup TCP#1–5 trap] → [Printer Error trap]