Oki MB461 - Page 134

44871001TH Rev.6
4-56
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
•InthecaseofMulti-purposeTray
(MB451/MB451w/MB471/MB471w/MB491/MB491+/MB491+LP/ES4191 MFP/
MPS4200mb/MPS4700mb)
(1) Turn off the printer.
(2) Open the multipurpose tray and the paper support.
(3) Open the feed roller cover by pushing its tab to the right.
(4) Remove the feed roller
by rotating it toward you.
(5 ) Installing is performed by the inverse procedure with removing.
Note!
1. To install the feed roller (Roller-Assy-MPT)
, keep pushing the cover until the
tab of the cover clicks into place.
①
Feed roller cover
Tab of feed roller cover