Oki MB461 - Paper Feeding Roller (Roller-Pick-Up, Roller-Feed-NOW, Roller-Assy-MPT)

44871001TH Rev.6
4-55
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
4.2.29 Paper feeding roller
(Roller-Pick-Up, Roller-Feed-NOW, Roller-Assy-MPT)
•InthecaseofTray1
(1) Turn off the printer and pull out the paper cassette tray.
(2) Remove the feed roller
as pushing its tab outward.
(3) As pushing the tab downward, open the cover (black) that is on the left of the feed
roller
.
(4) Pull out the feed roller
downward.
(5 ) Installing is performed by the inverse procedure with removing.
Note!
1. To install the feed roller (with no gear: Roller-Feed-NOW)
, keep pushing it until
it clicks into place and is fixed to the shaft.
2. To install the feed roller (with a gear: Roller-Pick-Up)
, keep pushing the cover
until the tab of the cover clicks into place.
①
Tab
②
②
Cover
Tab