Oki MB461 - 3.5 Assembly Procedure

Oki Data CONFIDENTIAL
3. MFP INSTALLATION
44871001TH Rev.6
3-6
3.5 Assembly Procedure
3.5.1 MFP Main Body
RemoveProtectiveEquipment
(1) Lift the machine and place it where it is to be installed.
Note! Donotopenthescannerunittilltheprocedureno.9iscompleted.
(2) Remove the protection tapes at the top and sides of the machine to take out
cushioning materials.
(3) Remove the protection tapes to open the MP tray.
(4) Remove the protection tape to pull the paper up.
Cushioning
materials
Protective tape
Protective tape
Protective tape