Oki MB461 - 3.9 Checking of User Paper

Oki Data CONFIDENTIAL
3. MFP INSTALLATION
44871001TH Rev.6
3-27
3.9 Checking of User Paper
Load the media used by the user in the printer, make media weight/media type setting, print
outMenuMap/DemoPage,andcheckprintoutstomakesurethatnotonerakesoff.
Type Weightorthickness
Settings on the operator panel
Printer driver
[Media weight]
settings*
2
Media weight
(paper thickness)
Media weight
(paper
thickness)
Media type
(paper type)*
1
Plain
paper*
3
52 54kg (60 63g/m
2
) LIGHT
PLAIN
Light
55
64kg (64 74g/m
2
) MEDIUMLIGHT Medium Light
65
75kg (75 87g/m
2
) MEDIUM Medium
76
89kg (88 104g/m
2
) MEDIUMHEAVY Medium Heavy
90
105kg (105 122g/m
2
) HEAVY Heavy
106
140kg
(123
163g/m
2
)
ULTRAHEAVY Ultra Heavy
Postcard*
4
— — — —
Envelope*
4
— — — —
Label 0.1 to under 0.15 mm HEAVY LABELS Label 1
*1: The factory default for the media type is [PLAIN].
*2: Media weight and type can be set on the operator panel and in the printer driver.
Thesettingsintheprinterdrivertakepriority.Dataisprintedoutinaccordance
with the settings on the operator panel when [Auto selection] is selected in [Feed
tray] or when [Printer setting] is selected in [Media weight].
*3: The weight of paper supported for duplex print is 64 to 122g/m
2
(55 to 105 kg).
*4: It is not necessary to set media weight and type for postcards and envelopes.
Memo! Printspeeddecelerateswhen[MEDIUM]through[ULTRAHEAVY]ofmedia
weight or [LABELS] of media type is set.