Oki Data CONFIDENTIAL
44871001TH Rev.6
5-10
5. Lubricating point
⑪
-1 44914801PA Printer-Unit
EM-30LP Class D
Apply MOLY KOTE (EM-30LP)
at the 3 places (120˚ divide) on
the hatched areas.
(Gear tooth surface)
⑪
-2 44914801PA Printer-Unit
Plate-Assy-Side-R
Apply a normal amount of MOLY KOTE
(EM-30LP) to the sliding surface with
Drum Shaft. (hatched areas)
⑫
44564901PA Cover-Assy-Stacker
HANARL SF-133 Class C
Lever-Lock-Button sliding surface
(All circumderence of the hatching portion)
Leave it for about 30minutes (drying time) after painting HANARL
SF-133, and then Assemble the Lever-Lock-Button.
HANARL SF-133 should not protrude outside from the exterior surface.
To Next Page
Loading...
