Oki MB461 - Page 153

Oki Data CONFIDENTIAL
44871001TH Rev.6
5-16
5. Lubricating point
2) 44539401 Case-Hinge-L
⑥
44538701PA Tray-Assy-Document
44538801 Tray-Document
3) 44540001 Case-Hinge-R
EM-D110 Class C
Apply a normal amount of
MOLYKOTE (EM-D110) to the
hatched area. (4 surface)
EM-D110 Class C
Apply a normal amount of
MOLYKOTE (EM-D110) to the
hatched area. (4 surface)
SF-133 Class C
Apply a normal amount of HANARL
(SF-133) to the hatched area.
(3 sliding surfaces)
SF-133 Class C
Apply a normal amount of HANARL
(SF-133) to the hatched area.
(3 sliding surfaces)
Leave it for about 3minutes (drying time) after painting HANARL SF-133,
and then assemble the
Tray-Assy-Document