Oki Data CONFIDENTIAL
44871001TH Rev.6
6-32
6. MAINTENANCE MENUS
6.6.2 Notes on SU board (MHE)/Scanner Unit replacement
1. Set the Scanner parameter when replacing the SU board (MHE)/Scanner Unit :
Before replacing the SU board (MHE)/Scanner Unit, try to get the scanner
setting parameters from the board by using tthe SU board (MHE)/Scanner Unit
replacement function of Maintenance Utility, if it is still able to be accessed by
Maintenance Utility.
After replacing the SU board (MHE)/Scanner Unit to new one, restore the scanner
setting parameters to new one by using Maintenance Utility. For further information,
refer the instruction of the manual of Maintenance Utility.
To Next Page
Loading...
