Oki MB461 - Page 206

Oki Data CONFIDENTIAL
44871001TH Rev.6
8-14
8. TROUBLESHOOTING PROCEDURES
No. Category
PJL
Status
Code
Error Warning Description
81 Normal 10800 1
2
3
4
5
Speed Dial List printing ... Indicates that printing of fax
location list that is registered in
Speed dial.
82 Normal 10801 1
2
3
4
5
Group List printing ... Indicates that printing of fax
location list that is registered in
Group dial.
83 Normal 10804 1
2
3
4
5
Transmit/Receipt Journal printing ... Indicates that printing of fax
communication (sending and
receiving) result list.
84 Normal 10806 1
2
3
4
5
MCF Report printing ... Indicates that printing of fax
sending confirmation report.
85 Normal 10807 1
2
3
4
5
Check Message printing ... Indicates that printing of fax
communication error report.
86 Normal 10808 1
2
3
4
5
Fcode Box Journal printing ... Indicates that printing of
the message report that fax
receiving data is sroted in F
code box by F code receiving.
87 Normal 10809 1
2
3
4
5
Erased Report printing ... Indicates that printing of
the message report that the
stored fax data in memory was
eraced.
88 Normal 10810 1
2
3
4
5
Fcode Box List printing ... Indicates that printing of the
enabled F code box list.
No. Category
PJL
Status
Code
Error Warning Description
89 Normal 10 811 1
2
3
4
5
Block Junk Fax List printing ... Indicates that printing of
the location list that is not
permission to receive fax.
90 Normal 10793 1
2
3
4
5
Data transmission in progress. Indicates that scanned image
data sending to PC.
Cannot see the message
at broadband network
environment.
91 Normal 10838 1
2
3
4
5
Cancelling ... Indicates that the image data
writing to USB memory is
cancelling.
This massage is displayed
when an error is occurred
during the data writing to USB
memory.
The key operation is disableed
during this message displayed.
92 Normal - 1
2
3
4
5
Fax Rx Doc. printing ... Printing fax Received Data.
93 Normal - 1
2
3
4
5
Fax Store Doc. printing ... Printing Stored fax sending
data.
94 Normal - 1
2
3
4
5
Do you wish to resume scanning? Indicates to resume the
ADF scanning for copy. The
message is displayed when
occurring some printer related
errors and clearing the error
conditions. If all sheets are
scanned correctly and no
remained before stopping the
scanning, the message is not
displayed.