Oki Data CONFIDENTIAL
44871001TH Rev.6
8-26
8. TROUBLESHOOTING PROCEDURES
No.
Category
PJL Status
Code
Error Warning Description
54 Error 482yy
483yy
1
2
3
4
5
Tray Media Mismatch:
%ERRCODE%
Please install
paper(%MEDIA_SIZE%
%MEDIA_TYPE%) on %TRAY%.
The media type in the tray
and the print data do not
match.
Load paper that was set
in %MEDIA_SIZE% and
%MEDIA_TYPE% in tray.
%TRAY%
Tray1
Tray2
Paper size displays
in Custom mode:
<width>x<length><unit>"
ex.) 210 x 297MM
8.5 x 11.0INCH
The unit of paper size
in Custom: The unit
specified for MP Tray
(menu setting) is used if
no unit is specified by the
driver. When the driver
specifies a unit, the unit is
used for display.
55 Error 480yy 1
2
3
4
5
Tray Media Mismatch:
%ERRCODE%
Please install
paper(%MEDIA_SIZE%
%MEDIA_TYPE%) on %TRAY%.
The media type in the tray
and the print data do not
match.
Load paper that was set
in %MEDIA_SIZE% and
%MEDIA_TYPE% in tray.
%TRAY%
MP Tray
Paper size displays in
Custom mode:"
<width>x<length><unit>"
ex.) 210 x 297MM
8.5 x 11.0INCH
The unit of paper size
in Custom: The unit
specified for MP Tray
(menu setting) is used if
no unit is specified by the
driver. When the driver
specifies a unit, the unit is
used for display.
No.
Category
PJL Status
Code
Error Warning Description
56 Error 482yy
483yy
485yy
1
2
3
4
5
Tray Media Mismatch:
%ERRCODE%
Please install
paper(%MEDIA_SIZE%
%MEDIA_TYPE%) on %TRAY%.
The size of paper or
media type in the tray
does not match the print
data.
Load paper that was set
in %MEDIA_SIZE% and
%MEDIA_TYPE% in tray.
(It takes a while until the
status disappears after
you have closed the tray
and the lever lifted.)
%TRAY%
Tray1
Tray2
The paper size displaying
form of the custom mode
is the same as above.
57 Error 480yy 1
2
3
4
5
Tray Media Mismatch:
%ERRCODE%
Please install
paper(%MEDIA_SIZE%
%MEDIA_TYPE%) on %TRAY%.
The size of paper or
media type in the tray
does not match the print
data.
Load paper that was set
in %MEDIA_SIZE% and
%MEDIA_TYPE% in tray.
%TRAY%
MP Tray
The paper size displaying
form of the custom mode
is the same as above.
58 Error 30097 1
2
3
4
5
Memory Overflow: 420
Please see Help for details.
Close
Memory capacity
overflows due to the
following reason.
Install expansion RAM
or decrease the data
amount.
- Too much print data in a
page.
- Too much Macro data.
- Too much DLL data.
- After frame buffer
compression, over flow
occurred.
To Next Page
Loading...
