Oki MB461 - Page 23

Oki Data CONFIDENTIAL
44871001TH Rev.6
1-16
1. CONFIGURATION
Item Description
Interface (PC <-> MFP) USB2.0 (High Speed), Ethernet (10/100 Base-T)
Scan Mode Scan method Flatbed, ADF, Auto
* In Options Direction (Left/Upper) and Duplex can be
selected. *
2
* In Auto, document is rst scanned from ADF and then
if there is none in ADF, from FBS assuming there is in
Flatbed.
Color Mode Color (24bit), Grayscale (8bit), B/W, Halftone
* Device output: Color, Grayscale, B/W, Halftone is processed
by driver.
Resolution Custom 50 ~ 600dpi (in increments of 1dpi)
Preset 75, 100, 150, 200, 300, 400, 600, 800, 1200, 2400, 4800dpi,
19200dpi
* Scanner’s basic performance varies with the selection
of Color mode among other settings, and if a resolution
exceeding this basic performance is specied, the driver
runs the resolution process.
Scan Size Custom ADF : Min: 105 x 148 mm / Max: 215.9 x 355.6 mm
Flatbed : Min:105 x 148 mm / Max: 215.9 x 296.9 mm
* for MB461+LP and MB491+LP and MPS4700mb
Flatbed : Min: 105 x 148 mm / Max : 215.9 x 355.6 mm
Preset A4, A5, B5, A6, Legal13, Legal13.5, Legal14, Letter,
Executive
* A6 Duplex Scan not supported
Image
Process
Output scale 1% ~ 999%
Sharpness None, Sharpen, More Sharpen
Background Remove Level0 ~ Level6
Edge Erase 5 ~ 50mm
Center Erase N/A
Font smoothing Ye s
De-screen Ye s
PC Scan Function
Item Description
Image
Quality
Adjustment
*
1
Brightness Ye s
Contrast Ye s
Gamma Ye s
Histogram Level Ye s
Curves Ye s
Color Balance Ye s
HSB H: Hue, S: Saturation, B: Brightness
*1 Can be set only in Advanced.
*2 Duplex (Default : OFF) and Binding (on the left/right, top) can be set only when ADF is selected.