Oki MB461 - Page 285

Oki Data CONFIDENTIAL
44871001TH Rev.6
10-5
10. APPENDIX
Setup
Parameters
Administrator Setup Service Technician Setup
Firmware
Update
Remarks
Network factory defaults *1 SD Card initialization *2 (Format open to users) SD Card format *3 (Common partitions) SD Card format *3 (PCL partitions) SD Card format *3 (PS partitions) SD Card data erasing *4 FLASH initialization *5 Language initialization *6 Reset Settings *7 Erase Privacy Data *8 Main counter reset *9 Consumable replacement reset *10 Job log deletion *11 Format SD Card *12 Format Flash ROM *13 Reset Admin Password *14 ALL RESET *15 OKIUSER change *16 [Factory default] Country code change *17 [Default setting by sales companies, etc.] CU FW update NIC FW update Scanner FW update
Setup data
Fax maintenance FR FR
Obsolete.
Unsupported in
FN296/7
Printer maintenance
FR
*26
JA setting information
CL
*27
CL CL
Job
Fax Tx data (pending) CL CL CL CL CL
Fax Rx data
(Print wait, Include Secure Receive image)
CL CL CL CL CL
Fax Rx data (confidential box) CL CL CL CL CL
Secure print job CL CL CL CL CL CL
Encrypted secure print job CL CL CL CL CL CL
Logs
JA log information (SD) CL
CL
*27
CL CL
CAC Setting has
been separated from
AccessControl during
the develpoment of
FX750. It behaves
following the
information same as JA
log.
JA log information (FLASH)
CL
*27
CL CL
Stored to SD card
when SD is installed.
Job log information
CL
*28
CL CL CL CL
CL
*28
Debug log CL CL CL
By default the setting
is not stored.