Oki Data CONFIDENTIAL
44871001TH Rev.6
2-5
2. DESCRIPTION OF OPERATION
Transfer roller
ID Unit
Waste toner area
Image drum
Cleaning blade
Light guide part for
electricity-removing light
Charging roller
OPC drum
Electricity-removing
light
6. Drum cleaning
After completion of transfer, the toner remaining on the image drum is scraped off
by the cleaning blade. As a result of this, the surface of the image drum is cleaned,
and the remaining toner that has been scraped off is collected as waste toner in a
waste toner area.
7. Static elimination
After completing transfer, the image drum is illuminated with its surface to decay
static charge of its surface.
To Next Page
Loading...
