Oki MB461 - Page 62

Oki Data CONFIDENTIAL
44871001TH Rev.6
3-11
3. MFP INSTALLATION
(4) Adjust the manual feeding paper guide to the width of paper to be loaded..
(5) Insert the paper with the print side face up until its edge touches the paper feed
entrance.
Note! Donotloadpaperabovethellline.
(6) Press the Set button.
Register the loaded paper on the machine.
Proceed to "Configuring the Tray Settings".
Note!
•
Donotloadpaperofdifferentsizes,typesorweightsatthesametime.
•
 When adding paper,remove the paper on the MP tray and straighten the
edges of both stacks of paper, and then load them again.
 •
Donotputanythingotherthanpaperforprinting.
Memo!WhenloadingenvelopesontheMPtray,loadthemfaceupwiththe
orientation as stated below.
-You envelopes (Monarch, Com-9, Com-10, DL and C5) are loaded with
the ap folded and the ap should come to the right side to the feeding
direction.
Set button
Fill line