Oki Data CONFIDENTIAL
44871001TH Rev.6
3-18
3. MFP INSTALLATION
PrinterDriverConguration
The procedure differs according to which driver installed on the computer.
Important • Youmustbeloggedinasanadministratortocompletethisprocedure.
• WindowsPCLXPSprinterdriverisnotavailableforWindowsServer
2003andWindowsXP.
Reference The printer driver needs to be installed on the computer before doing
this procedure.
(4) For the network connection, select [Get Printer Settings].
For the USB connection, check [Lower Cassette].
(5) Click [OK].
ForWindowsPCL/PCLXPSDriver
Note! • This procedure usesWindows 7 as an example.The display may differ
depending on the operating system.
• ThisprocedureusesMB491PCLdriverasanexample.
(1) Click[Start]>[DevicesandPrinters].
ForWindows Server 2008 and WindowsVista, click [Start]
→
[Control Panel]
→
[Printer].
ForWindowsXP/WindowsServer2003,click[Start]
→
[Printers and Faxes].
(2) Right-click the OKI MB491 icon and select [Printer properties].
ForWindowsServer2008,WindowsVista,WindowsServer2003andWindowsXP
select [Properties].
ForWindows7,ifyouhaveinstalledmultipleprinterdrivers,select[Printer
properties]
→
[OKIMB491(PCL)]or[OKIMB491(PCLXPS)].
(3) Selectthe[DeviceOptions]tab.
ForWindowsPSDriver
Note! ThisprocedureusesWindows 7asanexample.Thedisplaymaydiffer
depending on the operating system.
(1) Click [Start]
→
[DevicesandPrinters].
ForWindows Server 2008 and WindowsVista, click [Start]
→
[Control Panel]
→
[Printer].
ForWindowsXP/WindowsServer2003,click[Start]
→
[Printers and Faxes].
(2) Right-click the [OKI MB491 (PS)] icon and then select [Printer properties].
ForWindowsServer2008,WindowsVista,WindowsServer2003andWindowsXP
select [Properties].
ForWindows7,ifyouhaveinstalledmultipleprinterdrivers,select[Printer
properties]
→
[OKI MB491 (PS)].
(3) Selectthe[DeviceSettings]tab.