146
Chapter 4 Reprocessing Operations
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
PRINT FORMAT (Error Result)
Figure 4.58
If the RFID function has not been enabled at the factory, the
columns for the serial numbers of endoscopes, model names
of endoscopes, user number, and user name will be left
blank.
2012/04/01 14:30
Process Started:
2012/04/01 15:00
Process Cancelled:
Error code
User number
Model name of scope
Serial number of scope (when two scopes were reprocessed)
Model name of scope (when two scopes were reprocessed)
Year/Month/Day and Hour/Minute
of the end of process
Serial number of this equipment
Serial number of scope
User name
Year/Month/Day and Hour/Minute
of the end of process
Year/Month/Day and Hour/Minute
of the start of process
To Next Page
Loading...
