Olympus OER-Pro - Printing of the Reprocessing Records

130
Chapter 4 Reprocessing Operations
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
4.11 Printing of the reprocessing records
You can print the reprocessing records by using built-in printer. Reprocessing
records include “Reprocessing Result” and “Error Result”.
• “Reprocessing Result” is the record provided for a completed
reprocessing process. For the printed information about
“Reprocessing Results”, refer to “PRINT FORMAT
(Reprocessing Result)” on page 145.
• “Error Result” is the record provided when an error is
encountered during a reprocessing process, which result in
an incomplete reprocessing process. For the printed
information about “Error Results”, refer to “PRINT FORMAT
(Error Result)” on page 146.
• The print function can print completed reprocessing cycles or
error codes that occur during the reprocessing cycle. It
cannot print the record of completed/incomplete
sub-independent processes and the record of error occurred
during the standby operation. For details on the print function
of error result, see Table 4.3.
Print Option
Error occurred
during reprocessing
cycle
Error occurred when
starting
reprocessing cycle
(ex. E12, E31, E91)
Error occurred when
in standby
Error occurred
during
sub-independent
process
AUTOMATIC
PRINTING
 –––
PRINT LAST
 ––
PRINT TODAY
 –––
PRINT ALL
 –––

Print option can print out the
subject error result
–
Print option cannot print out the
subject error result
Table 4.3