Olympus OER-Pro - Confirming the Disinfectant Solution Temperature; Chapter 6 Other Functions

Chapter 6 Other Functions
155
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
Chapter 6 Other Functions
6.1 Confirming the disinfectant solution temperature
Check the temperature of the disinfectant solution as described below.
1. Set the power switch to ON.
2. Press the INFO SEL button on the subcontrol panel to select “PROGRAM
INFO”.
Figure 6.1
3. The current temperature of the disinfectant solution is displayed on the
TEMPC display on the subcontrol panel.
Figure 6.2