Chapter 2 Nomenclature and Functions
31
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
ALC FLUSH
Performs alcohol flushing of the endoscope channel. For details, refer to
Section 6.9, “Alcohol flushing” on page 172.
AIR PURGE
Feeds air into the equipment and endoscope channels to remove residual
fluids. For details, refer to Section 6.7, “Air purge” on page 169.
RINSE
Rinses the inside of the equipment and endoscope. For details, refer to
Section 6.8, “Rinsing” on page 170.
INFO
WASH/CYCLE display
Pressing the information select button changes the information displayed on
the subcontrol panel as shown in Table 2.1 .
DIS/DAY display
Pressing the information select button changes the information displayed on
the subcontrol panel as shown in Table 2.1.
TEMP C display
Pressing the information select button changes the information displayed on
the subcontrol panel as shown in Table 2.1.
WASH/CYCLE
display
DIS/DAY display TEMP C display
PROGRAM INFO
Cleaning time Disinfection time
Temperature
1
LCG USAGE Cycles Days – –
TOTAL LCG
LOADS
6-digit display
TOTAL CYCLES 6-digit display
YY/MM/DD Year Month Day
H:MIN:SEC Hour Minute Second
1 Any temperature equal to or higher than 20C (68F) is displayed as
“20C” (68F). “[- -]” is displayed if there is not enough disinfectant solution
in the disinfectant tank to measure the temperature.
Table 2.1
To Next Page
Loading...
