Chapter 7 Routine Maintenance
197
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
5. Place the new water filter directly from the bag into the water filter housing
so that O-ring will be positioned upward.
Figure 7.15
6. Rotate the water filter housing in the direction shown to secure temporarily.
Figure 7.16
• To ensure smooth installation, it is recommended to moisten
the O-ring at the head of the water filter with clean water or
ethanol before securing it temporarily.
• The rotation drag increases during temporary securing, but
rotate the case all the way until it is stopped.
To Next Page
Loading...
